We provide fun, challenge and adventure to
over 400,000 girls and boys across the UK
a a a  A A
Disclosures Compass POL Print Centre

High ropes

(Published January 2018 replacing version July 2011)


This factsheet provides further advice and clarification of the requirements for constructing and operating high ropes activities in Scouting as defined in POR rule 9.78 – High Ropes Activities.

High Ropes Activities

Examples of activities that are classed as high ropes activities are:

Examples of activities not classed as high ropes activities are:

There is no height definition for when an activity becomes a high ropes rather than a low ropes activity. This will depend on many factors such as; the participants, the activity, the environment, etc. The defining characteristic is that; when an activity should use a safety system (such as belaying) then it becomes a high ropes activity.

Activities like monkey bridges and low level prusiking using spotting / crash mats rather than a belay system are not classed as high ropes as they don’t use a safety system such as a belay.
The key point is whether an activity should have a safety system, not whether it actually does have this system. This means that a high ropes activity cannot be made into a low ropes activity just by taking the safety system away as this could make the activity more hazardous for those involved.

Zip Wires vs Aerial Runways

Zip wires tend to be permanent constructions, while aerial runways tend to be temporary structures where constructing the aerial runway is often part of the activity that the young people can get involved in. The main difference within high ropes is that zip wires will generally use a harness system to attach to the zip wire, often using a simple belay system to exit the activity (meaning they are classed as high ropes), while an aerial runway will generally have a seat for participants to sit on (meaning they are not classed as high ropes). Another factor which can differentiate the system is the material used for the main line, in an aerial runway this is a rope and in a zip wire this is a metal wire. There remains a separate Aerial Runway Code to support those constructing and operating aerial runways.


Prusiking is an activity involving the use of a special knot (the prusik knot) to help an individual ascend a climbing rope. This is where a sliding know locks under pressure and can be used with a  loop, allowing the climber to place their foot to help move up the rope. tPrusiking is often used as a method to climb ropes attached to trees and also rock.

Prusiking activities are treated as high ropes activities and therefore must follow POR rules 9.78 -9.80. The risk assessment must take account of the possibility of the participant sliding down the rope and appropriate safety measures provided. In all prusiking activities the system used must be tested and have a redundancy, consideration should be made for the need for a safety rope for this activity.

Prusiking is different to the childhood pastime of tree climbing, which does not use any equipment or safety systems (such as belaying) and can be more hazardous.

Members may choose to use Single Rope Technique to achieve the same activity of ascending a rope, this involved the use of specialist ascending devices. When this is undertaken outside of a caving activity the high ropes rules apply.  

Commercial Centres

When using commercial high ropes providers (such as Go Ape) Scout parties must follow the Scout Association rules for using external providers to run activities. Leaders are therefore not required to follow the guidelines in this factsheet when using these providers.

Existing High Ropes Courses

The UK Ropes Course Guide from AAIAC (Adventure Activities Industry Advisory Committee), that permanent courses are required to follow, includes full details of how construction standards apply to existing high ropes courses and their maintenance and additions. All ropes courses need to follow the operational requirements of The Scout Association, even if they were built before these requirements were introduced.

Operating Manual for Permanent Structures

The constructor of a high ropes course should provide much of the information required for an operating manual. However the operator will need to ensure that their manual includes at least the following:

As per POR rule 9.79, permanent high ropes structures must have a written operating manual which needs to be approved by a Technical Adviser. The minimum qualification of a Technical Adviser is Mountain Instructor Award (MIA) or a European Ropes Course Association (ERCA) qualified high ropes instructor qualified to rescue (or equivalent of higher).

MIA Instructors can be found on the Mountain Training Association website.
ERCA Certified Training Bodies can be found on the ERCA website.

Guidelines for Temporary Constructions

When running any temporary high ropes activity that involves ascending a rope (i.e. prusiking, SRT, etc.), the rope being ascended must be quickly releasable under pressure by those running the activity.

All temporary high ropes constructions must:
Operating manuals for temporary constructions are generally much simpler than for permanent constructions. However the operator will still need to ensure it includes at least the following:
Where the same structure / setup / operation is used for multiple events over time (such as a prusiking rope set up behind the Scout hut a number of times over the summer), the same operating manual can be used. It will need updating where there are changes to any of this though, and any updates will need to be agreed by someone qualified to do so.

As per POR 9.80, where a temporary high ropes activity has a written operating manual it must be agreed by either a County Climbing Assessor or a European Ropes Course Association (ERCA) instructor qualified to rescue (or equivalent or higher).

Climbing, Caving and Mine Permits

If setting up and running a temporary high ropes activity under a climbing, caving or mine exploration permit then what you are planning on doing needs to come within the remit of your permit. In simple terms this means that; if you put a climbing wall (or were underground) where the high ropes structure is, would your permit allow you to set up and run the belay / safety system that you are planning, using the anchors that you will be using. So if, for example, your climbing permit allows you to run climbing on a man-made (artificial) tower using only the fixed anchor points, this will not allow you to set up and run crate stacking using a tree and natural anchors.

Permit holders will also need to work within the remit of their permit with regard to group sizes and any further restrictions included. This means that those holding leadership permits will need to lead the activity themselves (as they would when climbing, caving or in a mine), while those with a supervisory permit can designate leaders to groups and remotely supervise while still remaining responsible for the activity (again as they would when climbing).


Where natural features such as trees are used, check that:

If in doubt it is worth consulting a specialist arboriculturist, tree surgeon or similar to confirm that any tree used will be able to stand up to the pressures placed on it. However there are a number of checks that you can make without the need for a professional:



© Copyright The Scout Association 2018. All Rights Reserved.
Charity Numbers 306101 (England and Wales) and SC038437 (Scotland).
Registered address: The Scout Association, Gilwell Park, Chingford, London, England E4 7QW